assemble program
英 [əˈsembl ˈprəʊɡræm]
美 [əˈsembl ˈproʊɡræm]
网络 汇编程序
双语例句
- Write machine instructions, test, debug, and assemble program. Document overall system and develop data control procedures.
编写机器指令，测试、调试及集成程序。文件化整个系统及开发数据控制程序。 - Party A shall compile and assemble technical and commercial document, and shall program amendment and organize the negotiation.
审核乙方编制的商务、技术文件并汇总，提出修改意见、组织谈判； - The Method of IBM-PC Assemble Language Program Finished Correctly
IBM-PC汇编语言程序设计正常结束方法谈 - This paper discussed issues that water resources are faced with the global change studies, as well as the due important position of the water resources in the assemble program of global change studies.
从不同角度阐述了在全球变化环境中水资源所面临的诸多问题，提出水资源问题在全球环境与发展研究中应占有的重要位置。 - A Separating Process of Assemble Program Extraction for Four-element System
四组分体系组合式萃取分离工艺 - In aspect of software, a algorithm about high precision graduation by CNC is studied and assemble language exploiting application program is used, which has the advantages of occupying less internal space with faster transaction speed.
软件方面，详细研究高精度数控分齿的一种算法，采用汇编语言开发应用程序，具有占用内存空间小，执行速度快等优点。 - Computer often break due to error instructs in assemble language programming, This paper will deeply analyzes seven methods of IBM-PC assemble language program finished correctly by some example for reference.
在汇编语言编程时，由于指令使用不当经常造成死机，本文通过实例系统的阐述汇编语言程序设计正常结束的七种方法，供大家参考。 - And then, this article deals with the design and implement of DMA interface-board used for data-transmission between terminal and signal processor in a certain weather radar, and gives its soft flow-chart and assemble program.
为此，本文介绍了用于某气象雷达计算机终端与信号处理之间高速数据传送的DMA接口支持板的设计思路和实现方法，并给出了软件流程图和汇编程序。 - At last, this paper uses special assemble language of DSP to program the heart sound signals. The procedure has three modules: the wavelet module, the mathematic morphology module, the amplitude extraction module.
最后，利用DSP专用汇编语言编写心音信号处理程序，程序主要分为三个模块：小波分析模块，数学形态学模块和幅值提取模块。 - At the base of compiler forepart, considering repertoire, addressing mode and instruction period of object machine, adopting backfill to fill data for machine code in order to generate right object code, assemble language program.
在编译前端的基础上，考虑目标机的指令系统、寻址方式和指令周期，采用回填技术对机器码填充数据以生成等价有效的目标代码&汇编语言程序。 - Especially, taking advantage of the characteristic of element assemble in FEM program, method to manipulate the incomplete simple constraint among each beam is also presented.
根据一具体水平梁架的实际情况，结合有限元处理程序中组装总体刚度矩阵的特点，较好地实现了层合梁之间的不完全简支连接。 - Assemble Program Auto-Translate System
汇编语言程序自动移植系统 - The software design includes VC++ 6.0 program for the PC and assemble language program for the single-chip.
软件设计包括上位机的vc++6.0程序设计和下位机的汇编程序设计。 - The self-test software and the display interface software are programmed by LabWindows/ CVI and assemble language. Program and messages are sent through serial port by the simulation debug tool, which finally displays the self-test result.
在软件设计上，运用LabWindows/CVI和汇编语言分别编制了仿真调试工具软件和功能自测试程序，仿真调试工具通过微机串口向保护装置下载自测试程序并显示自测试结果。 - The coding rule of the password in AMI BIOS and the code's position in CMOS RAM are reveled in this paper and a method of decode and it's assemble assemble program are presented as well.
本文较全面地介绍了有关AMIBIOS的口令设置、编码规则以及密码在CMOSRAM中的存放位置，并介绍了一种解码方法，文末给出了执行程序。 - The actual working conditions of the rolling bearings in pump and types and corresponding assemble modes of rolling bearings were introduced; this program's design conception and flow of program were confirmed, based on analyzing and comparing some principles of type selection of the rolling bearings.
介绍了泵用滚动轴承的实际工作条件，以及泵用滚动轴承的类型及其组合方式，并在分析比较几种选型原则的基础上确定了本程序的设计思想与程序流程。 - Winsock modules based on TCP protocols were used for data communication between client and server and assemble language program module was embedded for sampling and signal output for the plant based on data card so that network and hardware were combined.
系统采用基于TCP协议的Winsock组件用C/S方式进行数据通信，并在控制服务器端嵌入汇编程序模块通过数据卡进行采样和控制信号输出，实现了网络通信和硬件系统的结合。 - The software of the system is developed through embedding Assemble Language in C program, such method takes the system readable and transplantable characters.
系统的软件部分是利用在C语言中嵌入汇编语句的方法设计，这种方法使得所设计的软件具有可读性好、可移植性强的特点。 - This paper designs the program of pulse generating and current controlling module with assemble language and designs the program of CPLD by using both VHDL language and graphic editor, and also do the work of emulation.
本文运用汇编语言设计了单片机内部程序，同时运用图形语言和VHDL语言相结合方式完成了脉冲发生及电流控制模块的程序设计及仿真。 - Users can run the source program, which is an assemble language program of μ PD7810/ 11, directly in IBM microcomputer, releasing from single-chip microcomputer, And emulator is associated with a series of advantages of convenience, flexibility, high speed and so on.
在脱离单片机的条件下，用户用它能在IBM微机上直接运行用汇编语言编制μPD7810/11单片微机程序；并且有使用方便、灵活，运行速度快等一系列优点。 - Taking a working way of scanning line after line and the words drifting from down to top as an example, provided the flow chart and assemble language source program, made the detailed note as well.
作为一个应用实例，给出了一种字符逐行向上漂移的工作方式程序控制流程图。 - With assemble language of DSP and C, the software program is written.
应用DSP专用汇编语言与C语言进行系统软件程序的编写； - Discussions on several important issues of the teaching reform of assemble language program design
关于汇编语言程序设计教学改革的几个重要问题探讨 - Using this tool, one can analyse a program automatically, and output an assemble language program, as well as the data, flow Chart, and table of basic blocks of the program.
使用这种工具可以对所输入机器语言进行自动分析，输出程序的汇编语言指令序列、程序中的数据、程序框图以及基本块表等信息。 - In the second part the assemble language program selected is run according to some simple hardware.
程序运行部分是针对几种简单的单片机系统硬件，仿真运行任意选定的汇编语言程序。 - In order to deal with different platform embedded code, a method of generating intermediate presentation is presented. Through interpreting assemble instructions by program, this method solves the problem that excessive instruction templates are needed to be wrote in the implement of generating intermediate presentation. 3.
为了实现对不同体系结构内嵌代码的统一处理，提出了用程序解释汇编指令的中间表示生成方法，解决了以往在实现中间表示生成时需要编写大量的指令模板的问题。 - Moreover, still using of assemble language programming and traditional liner program flow is not convenient to software upgrade and maintenance.
软件上还是采用汇编语言编程，流程上沿用传统的线性程序，不便于软件的升级和维护。 - For software system, Microcontroller node use Assemble language to program software module. CPC node use μ C/ OS-ⅱ as its operating system. Hardware drivers and application programs are developed based on μ C/ OS-ⅱ.
在软件体系上，单片机节点使用汇编语言开发软件模块；中央处理机采用μC／OS-Ⅱ作为它的操作系统，在该基础上进行驱动程序和应用软件的开发。